Information :
- Suitable for Infinite HPA conversion kits
- Level: Beginner
- Duration: 5 min
Materials required for installation :
- 2.5mm hex key (not supplied)
Important :
Always wear safety glasses when handling airsoft products.
1. Remove the indicated screw using a 2.5mm hex key.
2. To separate the assembly, remove the module by sliding the part backward.
3. Insert the module into the MP5 adapter in the direction indicated.
4. Finally, put the screw in place, then gently tighten it to lock everything in place.
Congratulations, the installation is complete.
3. Insert the module into the MP5 adapter in the direction indicated.
4. Finally, put the screw in place, then gently tighten it to lock everything in place.
Congratulations, the installation is complete.
0 comments