We are delighted to welcome you to this page dedicated to the installation of HPA adapters angled version.
If you are here, it is probably because you have purchased this accessory or are considering doing so.
Here you will find essential information to configure our HPA adapters simply and efficiently.
Information :
- This tutorial is suitable for Hi-capa and Glock models.
- Beginner level
- Installation time: 5-10 min
Materials required for installation :
- A Gbb magazine (depending on the model chosen)
- PH2 screwdriver
- 2.5 mm hex key (supplied)
- Silicone grease
Important :
- Always wear protective eyewear when handling airsoft products.
- Before beginning installation, remove the base pad, spring and push button from your GBB. Keep the magazine, the screw and the 2 gaskets (one on the screw and one on the base pad).
0 comments