The Infinite kit is designed to fit a wide range of GBB airsoft pistols using Tokyo Marui Glock 17 pattern magazines.

Thanks to its adjustable shim system, the kit's height can be fine-tuned to ensure optimal integration with each compatible platform.

Below is a list of tested models and any specific installation requirements. New models may be added as compatibility is tested and confirmed.

Compatible Models ✅

Important – Infinite Kit Installation

If your replica is fitted with an original magwell, it must be removed before installing the Infinite kit. The kit takes its place and uses the designated mounting point for secure installation.

Model	Manufacturer
AAP-01	Action Army
AAP01C
G17 Gen 3	- VFC / Umarex - WE-Tech - Guarder - E&C
G17 Gen 4	- Tokyo Marui - Guarder - VFC / Umarex - WE-Tech - E&C
G17 Gen 5 (standard version)	- VFC / Umarex - WE-Tech - E&C
G17 Gen 5 (MOS version)	- Tokyo Marui - Guarder - VFC / Umarex
KP-17	KJW
KP18
MK1	Saigo Defense
G18C	- VFC / Umarex - WE-Tech
G45	VFC / Umarex
G19X
GE - 3701	Golden Eagle
EU17	Raven
EU18
P80 PFS9	Janus Division
CTHULHU	Lancer Tactical

Compatibility may vary depending on the generation, version and manufacturer of a given model.

Non-Compatible Models ❌

Model	Manufacturer
Glock Series	GHK
SSP18	Novritsch
SSP28
BSK43	Kizuna Works
Agency Arms Exa	RWA
Agency Arms Ronin
Glock MOS Series	WE-Tech
G19 / G26	- Tokyo Marui - VFC / Umarex - WE-Tech
G42	VFC / Umarex
Orion / Evo Series	Poseidon
Galaxy Series	WE-Tech
VX Series	Armorer Work

Your Replica Isn't Listed?

This doesn't necessarily mean it's incompatible with the Infinite kit.

Many manufacturers produce replicas based on the same standard, but with certain design differences.

If your model isn't listed, you can check a few technical specifications to determine whether it meets the requirements for installing the kit.

Required Tools:

• A caliper or ruler.

First, make sure your replica meets all of the following requirements:

1. Your replica must be compatible with Tokyo Marui Glock 17 gas magazines.
2. The rear wall of the frame must be between 1.90 and 2.20 mm thick (see image 2).
3. The available depth for installation must be greater than 3 cm (see image 3).
4. The frame must have the mounting point designed for a magwell.

Important:

Always wear safety glasses when handling airsoft products.

1. Your replica must be compatible with Glock 17 gas magazines (Tokyo Marui, WE, AAP-01, VFC / Umarex).

2. The rear wall of the frame must be between 1.90 and 2.20 mm thick.

3. The available depth for installation must be greater than 3 cm.

4. The frame must have the mounting point designed for a magwell.

Not Sure If Your Replica Is Compatible?

If you're unsure about your model, feel free to contact me before placing your order.

You can also send me a few pictures of your lower frame taken from different angles. I'll be able to check its configuration and help you determine whether the Infinite kit can be installed on your replica.